These are our current projects

1. Building of an industrial ship to clean the oceans

Building of an industrial ship in the size around 300*300 m in order to be able to harbor all needed facilities to achive the purpose. The operation area shall be the plastic area south east of Japan. This ship shall gather the plastic, separate as much as possible Plankton, microorganisms and animal from the plastic and release them into the ocean. The plastic waste mix shall than be transformed in oil or gas and stored for transport. Estimated costs: 3 digit million

Working steps of the process:

Pumping the water-plastic-mix into tanks an board of the ship with the help of pumps and waterwells, these shall allready be mounted at the ship yard.

Separation of natur and waste components, while the plants and animals shall be released back into the ocean. This facility shall also be produced and fitted at the shipyard, but we belive that this facility will have to be refitted several times due to the complex funktions.

Trasformation of the waste into oil or gas. The industrial plant for this job shall be developed and builg in Japan. We expect several repairs and upgrades für thi splant so that the producer should be close the the operation area.

Storage of the oil/gas till transport. There is an american company who has special containers and large storages in the portfolio so this company would be our favorite producer for this part.

This industrial ship shall not sail under German flag. Out of immigration and employment law reasons at the moment Japan is our favorite. The tax is higher than in Germany but situation for employees (arival and departure) would be much easier.

The goal of this project is to clean the ocean as much as possible, the show the goverments of the different countries and companies that transfoming of plastic is profitable and as a result throwing plastic into the ocean is also an economical failure.

2. a Development and building of special air cool systems (maritime container size)

As could be seen in summer 2021 there were several heat-zones all over the wold which made the living in the regarding regions pretty inconvinient partly deadly. The target is to develop an air cool system which is different from air conditioners not only moving the heat but is converting as much heat as possible into electrical power whith the result that the area is really cooled.

If the build prototype will be cooling or not will largly depend from the achieved effectiveness of the components of the system. Every machine losses energie usually shown as heat and in the worst case the used compnents produce more heat than converted.

Part of the concept is to store these air cool systems (maritime container) at different places to be able to move them to heat-zones in order to start running as fast as possible.

2. b Development and building of special water condensators for Austria (special version of 2a)

One of the regions in Austria is planing more farsighted and found out that on of the large lakes dries out. They asked for help and offered money for solutions but the funds of the region are far to low to finance the development and buildung of the solution. This is no critism, money is often scarce.

3. Develoment and building of costal-cleaning-systems against oil spill desaster

Each time an oil spill desaster occurs the same happens. People who desperate collect the oil by hand or shovel, cleaning stones etc.. The idea is to build a machine smaller than an excavator and larger than a shovel so that for the next desaster some of these machines are in store to be able to send them to the regarding area per plane (eventual with service personal).

4. Entwicklung und Bau einer Uboot-Drohne zum sammeln von Verschmutzungen im Meer in größeren Tiefen.

The industrial ship of 1. will only be able to gather the waste-water-mix in small dephts. The problem is that the plastic particles sink with the time so that help for the larger dephts would be good. The realisation of this project will be dificult, most of the needed parts for this drone are not in existance .

5. Checking of a different solution for public and private transport

The actual trucks and cars produce two different kinds of polution, exhaust fumes and particulate matter. Through a change to electric propulsion the exhaust fumes can be reduced or avoided, but not the fine dust. So we would like to check if there are posibilities to largly reduce the emissions of particulate matter. There are some ideas but if these really reduce the dust emissions has to be checked.